503082 - High Power Wireless G Access Point 802.11g 54 Mbps PoE Support 23 dBm

The INTELLINET NETWORK SOLUTIONS™ High Power Wireless G Access Point features a powerful 23 dBm level of output power that provides you with a strong wireless connection for optimum network performance. And for advanced installations, the High Power Wireless G Access Point has an integrated Power over Ethernet (PoE) port that allows you to install the device in locations where AC power may not be available.

Power over Ethernet Port
The High Power Wireless G Access Point comes with a PoE PD port. This port can be used to power the device from a PoEcompliant
LAN switch, which is very convenient in situations where AC power is not readily available.
Powerful Wireless Signal
Because the High Power Wireless G Access Point outputs 23 dBm of power used to transmit the wireless signal, you
can use it to improve the quality of your wireless network. Many other wireless access points are typically designed to
provide less than 20 dBm. And you also have the option of replacing the detachable 2 dBi antenna with a high-gain
antenna, boosting your signal even more.
Secure Communications
The High Power Wireless G Access Point provides maximum wireless security by supporting 802.1x user authentication.
Other security features included in this access point are MAC address filtering, wireless LAN segmentation, disable
SSID broadcast and support for Advanced Encryption Standard (AES) encryption.
Flexibility
This access point can be configured in any one of five modes: 1) Access Point (AP), 2) Point-to-Point (PtP), 3) Pointto-
Multipoint (PtMP), 4) Repeater or 5) AP Client. This allows you to standardize on the products you use in your
network, even though they may be used in slightly different applications. It even comes with an extra Ethernet
port that you can use to daisy chain multiple access points, allowing you to install multiple access points using
only one port on your LAN switch.
Lifetime Warranty
Strict manufacturing standards ensure the highest quality in all INTELLINET NETWORK SOLUTIONS
products. All items carry a full Lifetime Warranty — the strongest quality commitment anyone can make.

Features

IEEE 802.3af-compliant PoE-powered device with one PoE (PD) port
Strong 23 dBm output power rating
Two LAN ports (PD port plus Ethernet port to cascade access points)
Supports Wireless Distribution System (WDS), Bridging, Client and Repeater modes
Supports WEP, WPA/WPA2 data encryption and client access control
Supports WEP, WPA (TKIP/AES) and WPA2 (AES/mixed) data encryption
Supports MAC filtering for wireless clients
Supports IAPP (Inter-Access Point Protocol) for wireless access point interoperability
Adjustable TX output power and data rate
Automatic and manual channel selection and data rate auto-fallback
Up to five times faster than 802.11b; 54 Mbps link speed
Compatible with all 802.11b/g wireless products
Supports Wireless g Only, Wireless b Only or Wireless b + g operation modes
Acts as DHCP server or DHCP client
Web-based management with wireless site survey
Firmware updates via Web-based management
System log via Web-based management
Lifetime Warranty

Specification:

Standards

IEEE 802.11b (11 Mbps Wireless LAN)
IEEE 802.11g (54 Mbps Wireless LAN)
IEEE 802.11f (Inter-Access Point Protocol, or IAPP)
IEEE 802.1x (Network Access Control)
IEEE 802.1d (Spanning Tree)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3af (Power over Ethernet)

General

Wireless frequency range: 2.412 – 2.484 GHz
Modulation technologies:
- 802.11b: Direct Sequence Spread Spectrum (PBCC, CCK, DQPSK, DBPSK)
- 802.11g: Orthogonal Frequency Division Multiplexing
Channels: USA and Canada: 11 channels; Europe: 13 channels; Japan: 14 channels
Antenna: single detachable dipole antenna with RP-SMA connector, 2 dBi gain
Output power: 23 dBm
Output power settings: Highest, High, Medium, Low, Lowest
Receiver sensitivity: -68 dBm (54 Mbps); -85 dBm (11 Mbps)
Maximum coverage distance: 100 m / 300 ft. (indoor); 300 m / 900 ft. (outdoor)
Wireless security:
- WEP encryption (64/128 bit)
- WPA (TKIP/AES), WPA2 (AES/mixed)
- IEEE 802.1x Radius client with EAP-TLS authentication
- Client access control through media access control (MAC) filter
Wireless modes:
- Access Point
- WDS Repeater
- WDS Bridge
- AP Client (Infrastructure + Ad-hoc)
LAN ports:
- 1 RJ-45 10/100 Mbps data port
- 1 RJ-45 10/100 Mbps data and power input port (PD port)
LEDs for Power, Status, Wireless Link/Act, LAN 1 Link/Act, LAN 2 Link/Act, Bridge, WEP, WPA, MAC Control
Certifications: FCC Class B, CE Mark, RoHS