8 Channel Audio & Video Switcher with Remote Control and On Screen Display.
This camera switcher allows you to switch video between 8 cameras. It has an On Screen Display (OSD) that allows you to set how you want each camera to be displayed, i.e. skip camera, show only selected camera, or auto switch between cameras. There are two audio/video output jacks, one for a monitor and the other for a VCR.
Features:
- Video inputs for up to 8 cameras
- Each camera can be set to be bypassed, fixed or auto switch
- Camera dwell time adjustable
- Audio mute function
- Built-in EEPROM memory for preserving setup information in case of power loss
- Built-in Real Time Clock with on-screen display
- BNC Connectors for Video and RCA Connectors for Audio
- RS-485 Interface port
- Remote control included
- Power supply included
Specifications:
| Signal Format | NTSC/PAL |
| Display Rate | NTSC: 60fps; PAL: 50fps |
| Num of Video Input Channels | 8 |
| Video Input | 1V p-p 75 ohms |
| Video Outputs | 2 x 1V p-p 75 ohms |
| Audio Input/Output | 2V p-p Max |
| Video Gain | 0.8V p-p to 1.4V p-p |
| Cross Talk | Better than 40 dB |
| Switching Interval | 1 to 30 seconds selectable on screen |
| Video Selections | Bypass – Scan – Fix (on screen) |
| RS485 | Yes |
| Position Indication | On screen |
| Video Connectors | BNC for video RCA for audio |
| Power Requirement | 12V DC |
| Dimensions | 12.83" x 1.67" x 6.34" |
| Weight | 2.5 lbs |
Note: Lenses, Power Supplies, A/V/Power Cables, Brackets, and etc are sold separately unless noted otherwise.
Prices and specifications subject to change without notice.
